| Customization: | Available |
|---|---|
| Primary Applications: | Cut Wood |
| Common Length: | 5,030mm |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Tooth Type | Flat Top Grind (FTG) Alternate Top Bevel (ATB) Triple Chip Grind (TCG) Hook Tooth |
Tooth number (TPI, Teeth Per Inch) | Low TPI (3-8 teeth): Suitable for fast rough cutting of softwood or longitudinal cutting (along the wood grain direction). Medium TPI (10-20 teeth): General purpose, balancing speed and cut surface quality. High TPI (24-80 teeth): Fine cutting of hardwood or cross cutting (perpendicular to the wood grain), smoother cut surface. |
Tooth geometry | Rake angle: Affects the aggressiveness of cutting, positive angles (such as 15°) are more aggressive, and negative angles are gentler. Side angle: Determines the chip evacuation capacity, usually 5°-15°. |
Material and coating | Material: High-speed steel (HSS), carbon steel, carbide, etc. Carbide has better wear resistance. Coating: Tef lon (anti-stick), oxidation coating (heat-resistant), etc., to extend service life. |
Saw blade thickness | Thin saw blades (0.5-0.8mm) are suitable for fine curve cutting, and thick saw blades (1.0-1.5mm) are more rigid and suitable for straight line cutting. |
Band Saw Blades | Width: 3mm (1/8") to 50mm (2"), narrow saw blades are suitable for curve cutting, and wide saw blades are suitable for straight line cutting. - Length: Determined by the wheel diameter of the bandsaw machine, commonly 1.5m-5m, and needs to be accurately matched with the machine model. Example: 1/4" wide × 93.5" long × 6TPI |
Hand Saw Blades | Length: usually 250mm-700mm, such as 500mm of traditional hand saws. Width: 20mm-50mm, affecting sawing stability |
Jigsaw Blades | Length: 50mm-150mm, short saw blades are suitable for thin boards, and long saw blades are suitable for thick wood (such as 100mm×6TPI). - Handle type: T-handle or U-handle, need to match the jigsaw model. |
Circular Saw Blades | Diameter: 165mm (6.5") to 350mm (14"), 185mm-210mm is common for home use. Aperture: 16mm (5/8"), 20mm, 30mm, etc., need to match the saw shaft. |
Selection Recommendations | Softwood/Rough Processing: Choose a saw blade with low TPI (6-10) and wide pitch. Hardwood/Fine Cutting: High TPI (18-24), ATB tooth type. Curve Cutting: Narrow band saw blade (3mm-6mm) or fine-tooth curve saw blade. Durability: Carbide teeth are suitable for long-term use, but the cost is higher. |
Precautions | - Ensure the correct direction of the teeth (usually facing forward) during installation. - Clean the resin residue between the teeth regularly to avoid overheating. - Adjust the saw speed according to the thickness of the material. If the wood is too thick, the speed needs to be reduced to prevent burning. The correct selection of saw blades can significantly improve cutting efficiency and quality. It is recommended to match the comprehensive parameters according to specific needs (such as material type and cutting accuracy). |
){kind=link}